Forklifts & FLTs

Forklift Daily Check App: How to Stop Paper Pre-Use Checks

How a forklift daily check app works, what UK rules expect from pre-use checks, and how to stop drivers ticking boxes without looking at the truck.

By Rhys Lowry, Checkmate Safety · · 6 min read

Most UK sites with forklifts already have a daily check sheet. The trouble is what happens to it. It hangs on a clipboard by the charging bay, it gets ticked at 7.58am by someone who hasn't looked at the tyres, and it goes in a box file nobody opens until something goes wrong. A forklift daily check app is meant to fix that by putting the check on the driver's phone and tying it to the truck itself.

This guide covers what a daily check should include, what UK rules expect, why paper checks fail, and what to look for in an app if you're thinking of switching.

What a forklift daily check is for

A daily (or pre-use) check is a quick visual and function check the operator does before using the truck, usually at the start of each shift. It is not the same as the thorough examination a competent person carries out under LOLER, or the planned service from your maintenance provider. It's there to catch the problems that appear between those visits: a split tyre, a leaking hydraulic hose, a horn that has stopped working, a seatbelt that no longer latches.

HSE's guidance on rider-operated lift trucks (L117) says operators should carry out a pre-use check at the start of each shift, and that faults should be reported and dealt with before the truck is used. Under PUWER, employers also have to keep work equipment in good repair and be able to show how they manage that. A daily check record is one of the first things an inspector or insurer asks for after an incident.

What to include on the checklist

Keep it short enough that drivers will actually do it properly. A typical counterbalance truck check covers:

Reach trucks, VNA trucks and pallet stackers need their own versions. If your trucks differ, your checklists should too. You can download our free forklift daily check sheet as a starting point, and our forklift pre-use check guide goes into each item in more detail.

Why paper daily checks fail

Paper isn't the problem on its own. The problem is that a paper sheet can't tell you whether the check happened.

Drivers can tick the whole column without walking round the truck. Health and safety people call this pencil-whipping, and almost every site has seen it. A sheet signed "nil defects" every day for a month is either a very good truck or a check nobody is doing.

Defects get lost. A driver writes "horn intermittent" on Monday, the sheet stays on the clipboard, the next shift doesn't read it, and the maintenance team never hears about it.

Missed checks are invisible. If a truck sits unused on Tuesday and gets taken out on Wednesday with no check, nobody notices until someone goes through the file.

Finding the evidence takes hours. When an insurer, a customer's supplier assessment or HSE asks for a truck's check history, someone has to dig through months of sheets, some of them unreadable or missing.

How a forklift daily check app works

The basic idea is the same across most apps: the checklist moves to a phone and every completed check is saved with a time, a date and a name. What separates a good app from a digital clipboard is whether it proves the driver was at the truck.

With Checkmate, each truck has a small device fitted to it. The device flashes red when a check is due. The driver scans it with their phone, works through the checklist for that truck, adds a photo if something is wrong, and submits. The light turns green. Because the scan happens at the truck, the record shows the driver was actually there.

That light matters more than it sounds. A supervisor walking the floor can see at a glance which trucks have been checked this shift and which haven't, without opening a laptop or chasing anyone. Defects come through with a photo straight away, so maintenance hears about the leaking hose the same morning rather than at the end of the month.

What to look for when choosing an app

Getting drivers to use it

Drivers tend to prefer a phone check to a paper sheet once they've done it a few times, because it's quicker. A few things help it stick. Keep the checklist short and specific to each truck. Show drivers that defects they report actually get fixed. And have supervisors look at the lights on their floor walk for the first couple of weeks, so everyone knows the checks are being seen.

Frequently asked questions

Is a forklift daily check a legal requirement in the UK?

HSE's approved code of practice for rider-operated lift trucks (L117) says operators should do a pre-use check at the start of each shift. PUWER requires employers to keep work equipment safe and in good repair. In practice, a documented daily check is how most businesses show they're meeting those duties.

Who should do the daily check?

The operator who is about to use the truck, after training on what to look for. On multi-shift sites, many businesses have the first operator of each shift do it.

How long should we keep daily check records?

There's no single fixed period in the regulations. Many sites keep them at least until the truck's next LOLER thorough examination, and longer for any truck involved in an incident. A digital system makes this easy because nothing needs filing.

Can drivers fake a check on an app?

On some apps, yes, if the check can be filled in anywhere. With Checkmate the driver has to scan the device fitted to the truck, so the check is tied to being at the truck.

How much does a forklift daily check app cost?

It depends on the number of trucks and assets. Checkmate subscriptions start from £100 a month, with hardware bought once at a fixed price and no charge per user.

Try it on your own trucks

If your daily checks still live on a clipboard, try Checkmate free for two weeks on a few of your trucks. You'll see straight away which ones are being checked. Start your free trial at checkmate-uk.co.uk or call Rhys on 07882 236560.